Changing lawn mower blades: A step-by-step guide
The lawn mower blade is one of the central components of your lawn mower and has a significant influence on the cutting performance and quality. However, it can happen that the lawn mower blade becomes blunt over time or needs to be replaced for other reasons. In this article, we will show you how you can easily remove and replace the lawn mower blade.
How to access the lawn mower blade
Find out here how you can get the best possible access to your knife.
Learn more
Instructions for changing the blade
Step 1: Take safety precautions
Before you begin removing the lawn mower blade, it is important to take the necessary safety precautions. Turn off the lawn mower and disconnect the spark plug wire to ensure that the engine is not accidentally started. Also wear gloves to protect yourself from injury.
Step 2: Access the lawn mower blade
Depending on your lawn mower model, there are different ways to access the mower blade. In most cases, you will need to remove the mower deck cover by loosening the mounting screws or clips. Check your lawn mower owner's manual for specific instructions.
Step 3: Remove the lawn mower blade
Once you have access to the mower blade, you will notice that it is secured with a bolt or nut. Use a wrench or suitable screwdriver to loosen the fasteners. Be sure to hold the blade firmly during the loosening process to avoid injury.
Step 4: Prepare the new lawn mower blade
If you are using a new lawn mower blade, it is advisable to prepare it before fitting it. Check that it is properly sharp and that it is not damaged. If necessary, clean it thoroughly to ensure that there is no residue or contamination.
Step 5: Install the new lawn mower blade
After the old mower blade has been removed, it's time to install the new blade. Check the new blade for compatibility with your mower and make sure it has the correct dimensions and thread. Place the new blade onto the mower shaft and tighten the fasteners to secure it in place.
Step 6: Review and test
Once the new mower blade is properly installed, double check that all fasteners are tight. Close the mower deck and do a quick test run to make sure the blade is working properly and is not loose. Listen for any unusual noises or vibrations.
Frequently asked questions about removing and changing lawn mower blades
Before you remove the lawn mower blade, it is important to know which direction the blade is attached. Most of the time, the screws are loosened anti-clockwise. Be careful when doing this to avoid injury.
When fitting a new lawn mower blade, it is important that the sharp side is facing downwards. Also check that the cutting edges are pointing in the correct direction so that you cut the grass and do not press it.
The lawn mower blade should be changed if it has been sharpened and is still blunt. It is advisable to replace the blade if it loses quality and affects the cutting pattern.
To remove the lawn mower blade, it is best to tilt your petrol lawn mower backwards so that the cutting side is facing upwards. This allows safe access to the blade and prevents fuel or oil from leaking. Remember to remove the ignition key and take safety precautions beforehand.
You can fix the lawnmower blade in a vice and sharpen it with a file or a wrench. Make sure that the blade is sharpened correctly and optimally.
Would you like to learn more about lawn mower blades? Then visit our blog and become a lawn expert!
Conclusion
Removing and replacing a lawn mower blade can be a relatively simple task with proper instructions and safety precautions.
To all who can and want to do it themselves,
Your RasenExpert Team